Cables for my new amp

Equipment / Electronics / Gear / Accessories Headphone Amps
1

Hi all,

I placed an order for the Monoprice Liquid Spark today (unfortunately I won’t be able to enjoy it for quite a while), however I saw it comes with a us plug. Apparently the powerbrick has a voltage regulator or something, so I should only need to change the plug. It looks like a c7 cord between the powerbrick and the wall, so could I just order this cable and use that (https://www.allekabels.nl/apparaatsnoer/1245/3346996/apparaatsnoer-c7-haaks-linksrechts.html)?

Also I need to go from a 3.5mm jack line out (FiiO E10K) to RCA, should I take great care in picking a cable or does it not really matter that much? The shortest cable I found was still 0.5m, but I wasn’t planning on paying more than €10.

Thanks :slight_smile:

2

Looks like C7 to me, so the cable you have there should work.

The shortest I know is 0.9 meters, Cordial CFY 0,9 WCC

1 Like
3

Cool, I’ll try that then.
I found two of them, but the quality seems dubious at best, hence my question whether you can really say much about the quality of the cables, especially considering I’ll “only” use an E10K, LS and DT880 250 ohm, not crazy expensive setups.

https://www.allekabels.nl/jack-naar-tulp-kabel/6266/1283655/jack-35-mm-naar-tulp-kabel.html

https://www.amazon.nl/deleyCON-RCA-Kabel-Audiokabel-Smartphone-HiFi-Ontvanger/dp/B0827X599B/ref=sr_1_9?__mk_nl_NL=ÅMÅŽÕÑ&dchild=1&keywords=jack+naar+rca+0.5m&qid=1597303459&sr=8-9

1 Like
4

Won’t know until you try.