Does anyone have any experience with Pro Ject Audio’s Amp’s and Dac’s? They are one the options in Norway so would be good to know if they are a good option.
Well i have PRO-JECT MAIA PRE in use. It’s decent at least with the specs:
- Power output : 2x * 25W/37W at 8 ohms/4 ohms (both channels driven)
- Frequency response : 20Hz - 20kHz (-0,3dB, -2,5dB)
- Channel separation : > 65dB at 20kHz
- Noise floor : > -90dB (A weighted)
- THD : < 0,07% at 15W
- Gain : 31dB (measured via line level input)
- Line level inputs : 2 pair RCA + 1 jack 3.5mm
- Line input sensitivity : 350mV
- Line input impedance : 50kohms
- Phono input : 1 pair RCA
- Phono input sensitivity : suitable for MM, MI or high output MC cartridges
- Phono input impedance : 47kohms
- Phono input gain : 40dB
- S/PDIF coaxial input : up to 24bit and 192kHz
- S/PDIF optical input : up to 24bit and 96kHz
- USB input : USB Audio Class 2 requires USB 2.0 or higher on computer
- USB data transfer : Asynchronous
- Digital to Analogue converter : Cirrus Logic CS4344 24bit/192kHz Multi-bit Delta Sigma type
- Variable line level output : jack 3.5mm
- Bluetooth version: 2.1 +EDR
- Bluetooth music receiver codec : aptX, A2DP profile
- Bluetooth range : 10 meters in direct visibility between source and receiver
- Speakers connectors: 4mm banana plugs, spades connectors or naked wire
- Headphone output : 6,3mm jack (16 – 600ohms)
- Outboard power supply : 20V/3A DC, suitable for your country’s mains supply
- Power consumption : max. 3A DC, <0.5W in standby
- Replacement battery remote control : 1 x CR2032 / 3V or 1 x CR2025 / 3V
- Dimensions W x H x D (D with sockets) : 206 x 36 x 150 (165)mm
- Weight : 1250 g without power supply
(Check manufacturer for tech.update specs)
Size is small also and clean.
Only bad thing it has is, when plugin in headphones. It will also play powered speakers… so automatic power-on/sleep does not keep monitors offline. So they need to turned off all the way.
Workaround with remote power plugs, so no prb.