šŸ”¶ Audeze LCD 2 Pre Fazors

LCD-2C then? I doubt any shop would keep a rev 1 pair lying around. If it is the LCD-2C, then it isnā€™t the same sound from the pre-fazors but still quite nice.

1 Like

Itā€™s def not the LCD2C. This one is wooden with the microsuede pads and headband. I checked inside the cups for the ā€œtriangle tipsā€ and nopeā€¦ definitely non fazor. I forgot to check the serial number tho :confused: . It was warm, full, smooth and has a wonderful low end.

2 Likes

Yup, sounds like one of the pre-fazors. Surprised that a shop had one available for auditioning. Lucky you! You could ask them if they are selling the demo unit.

If the headband is the one with a bit of foam in the middle and is stock to the can, then that is likely a rev. 1. If the stock headband is the bumpy leather cushion, then it is likely a rev. 2. The early production run of the rev. 2 still sported the wood-surrounded connectors, a site that was prone to cracking hence the metal/heavy plastic connectors that replaced it in later rev. 2ā€™s and other LCD cans.

1 Like

This one has the bumpy headband covered in microsuede. The connectors themselves are the angled black ones instead of wood

1 Like

From the sound of it, itā€™s a 2.2 PRE fazor vegan. Thatā€™s why the headband and pads are suede.

2 Likes

So I just called the sales rep at the store, he confirmed that the serial number starts with 54 which means it should have fazors according to Audezeā€¦ I definitely did not feel any sharpness or triangle-tip-like things inside the cups so Iā€™m hella perplexed

1 Like

I have a prefazor and it is definitely a preā€¦ yet the serial starts with 569ā€¦Go figure

1 Like

They should bring the vegans back, damnit. When I saw the non-leather option pad, I suddenly became hopeful until Audeze support mentioned that it was protein leather. Drats.

2 Likes

If itā€™s an early model then that makes sense.

1 Like

Well, Iā€™m still on the hunt for a 2.2 pre fazor. I guess itā€™s a good sign that people want to keep them

1 Like

At the moment, my favoriteā€¦I have the Aeon 2, The Elex, OG Nighthawks, E-Mu teaks etcā€¦ There is something special to me about these.

1 Like

Iā€™ve been searching high and low for them. I listened to the LCD X, LCD-3, even a Focal Clear. I found out that I much prefer the warmer sound signature of the LCD-2s. My 650ā€™s already covered the mixing reference part of my work but the LCD-2ā€™s are so fun.

1 Like

Yesā€¦ It took months for me to findā€¦ Patience and they will pop upā€¦

1 Like

I actually found a pair and the sale is pending :partying_face:
Now Iā€™ll have to find a good budget OTC/Hybrid amp to give me that sweet 1-4W at 70 ohm.

Garage1217 Project Ember seems to be the top candidate right now, though I am considering running an OTL as a preamp into my JDS atom to get that tube sound idk :confused:

4 Likes

I mostly run mine balanced out of my Liquid platinum amp, occasionally SE out of my Asgard3ā€¦ Both amps are awesome with this headphone

1 Like

I had the same experience. Went to demo some stuff, and tried LCD-2, LCD-3, LCD-4, Utopiaā€¦kept going back to the LCD-2. And now I have the LCD-24, which is somewhat of a hybrid of the LCD-2 pre signature with technicalities closer to the LCD-4.

1 Like

This sounds pretty amazing :thinking: is it lighter weight by chance? Than the lcd-2 pre faz?

1 Like

Do you think the Massdrop Cavalli Tube Hybrid can adequately power the LCD-2? Says it can do 1W per channel at 50 ohm.

Iā€™m looking for a hybrid under $300 that can bring out the LCDā€™s full potential so

1 Like

I would think so with no problem at allā€¦ Others may jump inā€¦Liquid plat is a cavalli design I believe

1 Like

Yes, they are lighter than the LCD 2F, 3, and 4, using the carbon fiber headband and magnesium frame/cups, but are similar to the LCD-2 Pre. Per specs, 540g for the 24 vs Pre-fazor 2 coming in between 225g-250g depending on wood, I believe.

2 Likes