I also had the same dilemma and the correct cable is the QDC connector ,visually the pins aren’t bare they have a plastic to them so “c” is your cable ,trust this stranger I commited the same mistake of choosing the wrong cable
i can confirm that this cable works with them
also a really good balanced cable for the price
Yeah I saw that one, that is actually the cable that Zeos is using for his KZ ZS10 Pros and I agree it is a good cable.
So “B” cable is the same as QDC then.
KZ ZS10 Pros are sold with a B cable.
Edit: Nope. C-type. It’s a “C-type” cable. “B-type” pins are 1mm longer. Don’t force the last millimeter if you get a “B-type” by mistake (or, well, simply, just cut 1mm from the pins).
Well I ordered a cable online and I don’t know what type it is because it only says 2 pin…I am screwed.
It will fit. 
2-pin is basically becoming a chi-fi standard, lol.
Someone on youtube was testing a lot of KZ headphones and said the cable was a bit hard to push in, and someone in the comments said “that’s because you’re using the “A” cable and for the ZS10 Pros you need the “B” cable”.
I ordered a “B” cable (the cheap AF, 2$ cable, but without mic) for my KZ ZS10 Pros, and it fits perfectly. It’s the exact same connector. And now someone tells you you need QDC or “C” cable…
So… 2-pin “A” will fit if you push hard. 2-pin “B” will fit perfectly, and apparently, “C” is the same as QDC, and will fit too. So, no worries anyway. Worst case scenario you just get a 2-pin “A” cable that will never ever disconnect when you don’t want it to.
Edit: Get a “C-type” cable. “B-type” pins are 1mm longer. Don’t force the last millimeter if you get a “B-type” by mistake (or, well, simply, just cut 1mm from the pins).
I don’t have an “A-type” cable, so I don’t know about this one.
I will take your word for it, thanks. Also I ordered an 8 core one braided, there is a 16 core one but I am not so sure what is the different between the 2 also it is more expensive than the 8 core.
Just saw a 200-core on eBay… lol.
…damn, now that one gives an idea on how wires can get damn expensive depending on the cores it seems. You learn something everyday.
Nope, it’s 10$.
Some are just saying anything because obviously nobody will cut their cable to look for the number of “cores”, whatever that is even.
Never mind then…still do not have an idea what are 8 cores and 16 cores in wires to begin with.
Dude the right cable is c,or qdc if you get the other cables you will expand the opening ports on your iem ,sure you can shove anything but should you? Also be careful cause the pins dont have any support and can bend.
Thanks for the advice, I will make sure the new cable that I will be getting is a C cable.
Oh! I see it now. The connectors are the same. (B-type = Black, the other came with my ZS10 Pros… C-type?).
But the pins on the “B-type” cable are like one millimeter longer. That’s the only difference:
Is it really dangerous? Is there really not 1mm of space inside? I doubt it. But don’t force the last millimeter if you get a “B-type” by mistake (or, well, simply, just cut 1mm from the pins).
Edited my previous comments.
You know what, when the stock cable is a C Pin and came with the ZS10 Pros, I might as well get a C Pin cable so there will be no upcoming issues. I already made a mistake about a cable I bought for my Tin T2 back then.
Oh, and whatever the “letters” they use (A, B, C, QCD, OMGWTFBBQ, whatever), KZ Acoustics official website says “0.75mm” connector.
Yeah, the kz cables like to tangle lol
Oh dude, I’m sorry. That really sucks. I hope something changes some day when it comes to shipping.
Yeah that is also my reason why I bought a new cable for it, for it tangles a lot. xD