I just wish there was a multiple size packageā¦ š¤¦
2 Likes
So I have reversed some generic Medium tips that I got a while back from the Earphones Plus store on Amazon.com/us.
They were a bit more difficult to reverse that the Starline from KZ.
They are the best tips so far for the Oxygen. Super happy right now!!
3 Likes
It seems that they will size small and one might have to buy a size largerā¦
Great video explaining tip rolling
2 Likes
Heās is a cool tip for tips (
) i found on the ie900 topic to help IEMs with shallow insertion.
2 Likes
Ahhhh the old Blon 03 trick 
2 Likes
i just got the spinfip cp500 in L because i prettymuch always use the big tips that come with headphones. but with these i cant get a good fit. just before it is about to seal it feels like the tip gets a creas i gues kinda like in the picture. maybe the M ones would have been better
1 Like
M CP500s have a steep slope to the tip so they say 12mm, but I find they fit like 11mm in a bad way for me. I think CP500 are weird tips, polarizing in fit for many for sure, so donāt feel bad youāre having issues with them.
Have you tried CP100s? Maybe CP145s?
1 Like
no these are the first tips i got because the big tips that came with the KZ ZS10 pro felt like they stab my ear in the wrong angel and the shape of these looked good (a S/M/L set would have been nice). but i think i got used to the stock ones.
iāll probably get foam tips next but dont know if i should try a more expensive one like comply or dekoni or just some random one of amazon thet look good
CP100 are pretty good. But they are so soft that they tend to lose seal if you put them in too far.
To avoid this you could try Final Audio E tips or Azla Sedna.
Foam tips will change the sound pretty significantly, it will tame the treble and bloat the bass.
1 Like
yeah the spinfits probably are too soft for me.
taming the trable is what iām looking for becouse when i turn them up they get unpleasant before i reach the volume i want. but on low-medium volume they sound good.
but i donāt want to restock foam tips all the time.
Iāve just got a set of Spinfit CP155 and really like the cone shape and comfort but the bore size of 5mm is tad too big.
Does anyone know of any other tips with a similar extended shape but with a smaller bore size.Āæ
1 Like
CP145? Itās basicly the same if I recall correctly
2 Likes
not quite. The CP145 doesnāt have the extended tipā¦CP145 is 9.9mm and the CP155 is 11mm.
Doesnāt sound much but its makes quite a difference to fit plus the shape is a bit more conical on the 155.
4 Likes
CP500 has the same cone-shape and has a smaller bore, bit I think itās 1 mm shorter than CP155. You might also try the epro Horn ep00 tips.
1 Like
Anyone recommend a silicone pair for Tinhifi T2/T3/T4? I mostly use foam and only have CP145s which didnt fit it(short nozzle?)ā¦ oh I wear them down btw.
Havenāt had them in what feels like ages, but I always rocked CP100s with my T4.
2 Likes
Moondropās Spring Tips man, they are a huge improvement over their previous stock tips and therefore this is a first for me that I actually want more of these from the stock IEM that I got it from (the Katos, are great btw), and in my opinion they are that perfect, at least for me.
The fit is just right, not too firm or too soft, it has that balance of it sealing my ear perfectly along with its softness, making me feel at times that I am not a wearing an IEM at all.
It might not fit with everyone since all of us have different earhole sizes but when you have a similar earhole like mine, do give these a try and this should be an option for us to get.
10 Likes
Hi all! Recommendations for tips to pair with short-nozzled IEMs? In my case, the Oxygen? I am using CP145 (M), but it still feels a bit short. Iāve reversed KZ starlines, which are longer and seem to have the necessary length, but then there was too much treble.
CP155 maybe? Theyāre the longest I have. Boreās a bit wider as well though so may not suit the Oxygen nozzle.
1 Like