How does it work? What is the in and the out?
Mine is either 1-in/4-out or 4-in/1-out.
I run my Loki into mine and then go out to 4 amps:
Well I have not tested yet, but from what I gathered before I bought it, you can have any number of in and out. It just depends on how the buttons are depressed or not to get the signal through there correct chain.
3 Likes
I don’t quite get how it works, but would be interested to hear how you like it.
What were supposed to be Clear KPH30i (but received the grey) and my blue yaxi pads. The red pads get here tomorrow but it’s looking like I wont be putting them on until KOSS sends me the right pair.
8 Likes
QuicK test. Plugged dac into 6, then LS into 3 and LP into 4. Pushed all 3 buttons in and voila source goes to both amps simultaneously. I think the only restrictions is you can’t have 2 sources playing at the same time. So if I added another source to say 1, I would only depress either 1 or 6 depending on what source I want to use. All amplification inputs can be depressed at the same time. So no button switching really unless you are using different sources.
2 Likes
Nice, I have spare parts if you want them off a Technics unit that will slip right in, dual cassette deck and a multi band 2 channel EQ…LOL classic stuff, mine is from the late 80’s.
New MMCX cable for the P1’s showed up today (Linsoul Euphrosyne Litz). Looks good, feels good, sound good.
7 Likes
I’m not a fan of mine…
I found the rubber a bit sticky to the touch. The cable is quite heavy, I like a hefty cable but this cable is extreme and the smell of the rubber I was not a fan of.
2 Likes
The rubber feel is very unique, not at all what I expected. But so far I like it (maybe just because it’s different).
1 Like
I love the look of the cable. My expectation was that it was going to be fabric and not rubber. OOPS! 
1 Like
same here - I was surprised as well
1 Like
Getting Yggy with it. (w/ Analog 2 and Unison Upgrade)
Been hitting this (Part 2) thread entirely too hard of late. I must chill out, will chill out, and just let everything soak in and marinate for a nice long while. Some trades, some barter, so it’s not all hard cash, but still. Should be here by mid-week.
32 Likes
Audiomat Arpege
Power amplifier for the Holt Hill Cionnsailes (and bought the amp from Holt Hill as well). Fed by Berkeley Alpha DAC Series 1.
if you’re in New England I would highly recommend dropping by Holt Hill Audio in Lawrence, MA.
17 Likes
One thicc RCA splitter and some XLR to RCA adapters for my setup’s final form. Got the amp hooked up to the tube buffer and the DAC directly. Also pushing line out to speakers giving me the option to tube/tone my 2.1 too.
Absolute madness back here 
20 Likes
just got shipping confirmation, I’m hyped af
see you in the “Share snapshots of your present ENDGAME =D” thread Thursday
28 Likes