Who here is using the Khadas Tone Board?

FBizzle · January 28, 2020, 2:35pm

Just get the d10. Don’t look back. It is more versatile, has more features like USB input / edit: spdif output and has a case. It would be too close to call anyway.

M0N · January 28, 2020, 2:36pm

Well it only has usb in, the spdif is spdif out

Deon · January 28, 2020, 3:18pm

The Khadas has eithe usb in or coaxial in. And also has coaxial out. Mmmmmm

Deon · January 28, 2020, 3:47pm

Im just going to say screw it and get the Khadas, with the case its $10 more than the D10. Will report back once I receive it.

M0N · January 28, 2020, 3:50pm

Nice, curious to hear your thoughts

Deon · January 28, 2020, 3:51pm

Very excited for this. Thanx guys

FBizzle · January 28, 2020, 4:01pm

Welcome to the KTB club. Where did you get it where with the case. Just curious.

Deon · January 28, 2020, 7:05pm

Amazon, they sell the case seperate but will receive both at once if that makes sence. And its not the original Khadas Case. But more than adequate imo.

Deon · January 28, 2020, 7:08pm

Marzipan · January 28, 2020, 7:10pm

very nice. give that a nice paint job (clear acrylic? yuck!) and wunderbar!

Deon · January 28, 2020, 7:12pm

Was thinking the same thing, going to look for a paint the same color as the LS.

Deon · January 28, 2020, 7:13pm

Whats the difference between the generic one with the pins and the one without the pins?

FBizzle · January 28, 2020, 7:19pm

The pins are for use with the VIM. Which is a Khadas competitor of the raspberry pi.

Generic is fine for use solely as a DAC

Deon · January 28, 2020, 7:21pm

So either one, they are the same just with extra lins for the VIM? Sweet will get the cheapest one with the least shipping and taxes lol.

Brian_Coffelt · January 29, 2020, 4:21am

That is the case I bought for my KTB, it looks good, but it does not fit together well.

The KTB sounds good, but it requires a special driver to be installed, most other devices do not.

Deon · January 29, 2020, 4:33am

How do you mean does not fit together well? And on other forums thetl guys say the windows drivers are better than the XMOS drivers. So not to bothered by drivers.

Brian_Coffelt · January 29, 2020, 9:32am

It was a very tight fit and required flexing to get all sides on it. A few ot the tabs broke from the pressure once assembled. I ended up with Top, Bottom, Front and Back only.

I am not sure what Windows drivers you are talking about. I have 3 win10 computers, had to install the XMOS driver on all. Even the documentation and website say you have to use that driver… It is not plug and play.

Deon · January 29, 2020, 12:20pm

Will post the link once I find it

Deon · January 29, 2020, 12:52pm

Read through that, think on page 6 or so they start talking about drivers

Wesley · January 31, 2020, 12:42am

Just ordered the KTB and this case for it.

I just built this HTPC and I was just going to use HDMI audio, but I’m getting audible popping while listening to music so hopefully outputting to the KTB via USB will solve it.