đŸ”¶ Sivga P-II

Headphones [Official] Open Back
176

I know a lot of people haven’t had the best pair of Aiva’s but my pair sound exactly as did Zeo’s described. The Fazor mod I did reallly helps the mids gets it into HD 650 territory. They become so lush. Now that I’ve got my Sendy’s to this point I was considering Aeolus but I think i’ve almost got everything that headphone also achieves

1 Like
177

audeze lcd 1 and hifiman sundara are the competition for those that dont like the sendy driver.

1 Like
178

Or the verum 1, or you can snag a used lcd 2 in this price range too

3 Likes
179

Thought I might post this here. The Sticky Fazor Sendy Aiva mod I did also applies to the Sivga PII. The sticky fazor has been applied to the front and backs of the left and right driver seeing as its a double sided planar

84416502_1652134658262282_7423170661201215488_n
84416502_1652134658262282_7423170661201215488_n1952×4032 350 KB
84746434_172404600752474_8184310716560310272_n
84746434_172404600752474_8184310716560310272_n1952×4032 354 KB

1 Like
180

The Effect of the Sticky Fazor is that it helps not only guide the air but brings up the mids to HD 650 territory

1 Like
181

If you’re wondering how to open up the Sendy’s to mod them with a stick fazor. Here is a 100% tear down to the driver i did on the Sendy Aiva

1 Like
182

I haven’t heard the LCD1 but i had the Sundara. and i never felt it was the equal of the Aiva. The Aiva just sounds better to me. I remember when i upgraded from to the Aiva, my eyes just popped out of my head

1 Like
183

Same for me to, instantly I could feel these were far above their price range

184

That sound really fantastic, grats. wish i could hear it. be nice if somebody had a printable version of the fazor. i might try to mod it then

1 Like
185

and somehow made them soundfaster, so the agression is up even more. I think that a Fuzzor (Felt Fazor) would aid better to the sound than the Stick Fazor. I’ll have to experiment and report back. One thing to note when modding them dont screw them in really hard back into the wood, it seems to ruin the air on the headphone

1 Like
186

Is that just clear tape you put onto there or something else? Do you put it over all of it or only certain areas?

187

sounds like yuou just found a perfect fit fo ryou ears and preferneces but for those that aren’t into narrow sounding, or want a darker sounding headphone. or just generally different preferences there are better headphones for those people. I just dont like blanket statements to say these are the best or they have no competitors just is untrue

188

i never said they where the best or that they have no competitors or that they are for everyone. Also i would love it if you would stop going on me for stuff i said or didnt say. i know how you guys feel.

189

aight will do sorry man

190

Just saying

1 Like
191

Note the “one of the” line there. is that not correct?

Notice again the line “V shaped”

Also i dont like how much you guys are on my case. I’m not a fool. if you dont like my recommendations fine. but lets not get overbearing about it.

192

Its clear tape with only 1 - 2 millimetres over the edge of the plastic housing to condition the air to come together without crashing into each other.

193

Hey all you said was that you didn’t say best, which is clearly not true. I’m simply noting that you said best, not really trying to say anything else

194

I see you remover the thin fabric cover over the driver, what effect does that alone give you?

195

I put it back on after I was done modding. I would say it barely blocks much sound if any